Materials Science: Materials Review

Editor-in-ChiefV. Gunasekaran

ISSN: 2529-7791 (Online)

Journal Abbreviation: Mater Sci Mater Rev

Publication Frequency: irregular

Article Processing Charges (APC): Click here for more details

Publishing Model: Open Access

Journal no: 22G

About the Journal

Materials Science: Materials Review is an international Open Access journal that focuses on all areas of materials science into a single and unique reference source. This is a cross-disciplinary journal to publish original full research articles, reviews, rapid communications, and letters of important technical and scientific findings from fundamental point of view of materials science research.

Recently Published Articles

Open Access Original Research Article
Photovoltaic power generation system
by Huanhai Huang, Xiuli Ding, Lingwei Tong
Mater Sci Mater Rev, 1(1). 2017.
Abstract
The potential crisis of energy and the deterioration of ecological environment make the world's cumbersomedevelopment of renewable energy including new energy, including solar energy. Traditional energy in the coal, oil andnatural gas are evolved from anc…

Open Access Original Research Article
Polyethylene plastic production process
by Xiuhua Zhong, Xudong Zhao, Yongkang Qian, Yan Zou
Mater Sci Mater Rev, 1(1). 2017.
Abstract
Polyethylene has become the most important polyolefi n plastic with excellent mechanical properties, processingproperties and chemical resistance. It is used in the production of film, packaging and pipe. However, the nonpolarproperty and low rigidity of …

Open Access Original Research Article
Preparation and Study of Waterborne Asphalt Pavement Maintenance Agent
by Chunfei Yuan, Qinglai Song, Ningning Zhao
Mater Sci Mater Rev, 1(1). 2017.
Abstract
The precursor Ni0.76Co0.1Mn0.1 (OH) 2 was prepared by coprecipitation method. The precursor was mixed withMg (OH) 2 / Zn (NO3) 2 / TiO2 and LiOH.H2O, Li2CO3 to synthesize doped lithium Ion layer positive electrodematerial Li [Ni0.8-xCo0.1Mn0.1Mx] O2 (x = …

Open Access Original Research Article
Study on fl ame retardant ABS
by Xiaonan Lin, Wenmin Feng, Liangzhu Xu
Mater Sci Mater Rev, 1(1). 2017.
Abstract
Flame-retardant ABS resin was prepared by adding fl ame retardant, toughening agent and dispersing silicone oilwith acrylonitrile-butadiene-styrene resin (ABS, grade 0215 A) as raw material. The results showed that in the ABSresin, fl ame retardant with t…

Open Access Original Research Article
The development of polyurethane
by Yanping Ye, Qingxuan Zhu
Mater Sci Mater Rev, 1(1). 2017.
Abstract
Polyurethane is one of the six promising synthetic materials in the world. Due to its excellent product performanceand wide application field, it is a crucial industry of development in the world. This paper introduces the progressof polyurethane industry…

Indexing

Archiving and Indexing Road Map

Materials Science: Materials Review aims to be indexed by world-recognized databases, for example, PubMed, Scopus and Science Citation Index (SCI). Materials Science: Materials Review has been indexed by several world class abstracting/indexing databases:

Editorial Board

Editor-in-Chief

V. Gunasekaran, Solid State Electronics Lab, Research Institute of Electrical Communication, Tohoku University, Katahira, Japan

Editorial Board

Adnan Shahid Khan, Faculty of Computer Science And Information Technology (FCSIT), Universiti Malaysia Sawarak (UNIMAS), Malaysia
Aman Jantan, Computer Sciences, Universiti Sains Malaysia, Malaysia
Ismail Ahmedy, Computer System And Technology(Fcsit), University of Malaya, Malaysia
Nadir Shah, Computer Science, COMSATS Institute of Information Technology, Wah Campus, Pakistan
Shahbaz Akhtar Abid, Computer Science, COMSATS Institute of Information Technology, Wah Campus, Pakistan
Zurina Mohd Hanapi, Communication Technology and Network, Universiti Putra Malaysia, Malaysia

Focus and Scope

Materials Science: Materials Review is an international Open Access journal that focuses on all areas of materials science into a single and unique reference source. This is a cross-disciplinary journal to publish original full research articles, reviews, rapid communications, and letters of important technical and scientific findings from fundamental point of view of materials science research.

This journal publishes the most significant new research of experimental and theoretical studies which focus on the synthesis, characterization, properties of materials such as metals, non-metals, metal-oxides, ceramics, glasses, polymers, composites, solids, semiconductors, and electronic materials. Topics are not limited to application of materials as optical materials, superconductors, thin-films, porous materials, nanomaterials and their structures. In addition, the reports of materials with mechanical, magnetic, thermal, biomedical and biological properties are also invited.

For Authors

  • A manuscript would not be accepted if it has been published or is currently under consideration for publication in any other journals. The author will need to notify the editorial team if the data in their submission has been presented in conferences.

  • Authorship should be limited to people who have contributed substantially to the work. Authors must indicate their specific contributions to the published work. This information should be listed in the manuscript under the section ‘Author Contribution’. Examples of contributions include: designed research, performed research, contributed new reagents or analytic tools, analyzed data, wrote the paper.

    For more information on submission’s format, please refer to the ‘Author Guidelines’ link accessible from the ‘About’ button at the top row of this page.

    The corresponding author should be clearly indicated for all manuscripts submitted. A maximum of two corresponding authors are allowed for the responsibilities associated. The corresponding author(s) is responsible for:

    • Obtaining permission from all the authors mentioned in the manuscript
    • Ensuring adherence to all editorial and submission policies and for any communications and actions that may be necessary after publication
    • Including written permission from the authors of the work concerned for any mention of any unpublished material included in the manuscript, e.g. data from manuscripts-in-press, personal communication, or work in preparation.
  • The author has to provide the authorization of no conflict with any financial body or funding agency that might influence the results or interpretation of their manuscript. All authors, members, reviewers and editors must disclose any association that poses a conflict of interest in connection with the manuscript. The corresponding author will be asked to sign a form behalf of all of the authors regarding potential conflicts of interest at the time of acceptance.

  • The editorial team does not approve of any plagiarism attempts. iThenticate will be utilized at the editor’s discretion to verify the originality of submitted manuscripts. If plagiarism is detected during the review process the manuscript may be rejected pending the severity of plagiarism. Therefore, if a manuscript uses a text copied directly from another source, this text must be written in quotation marks and the original source must be cited.

  • All articles must be written in English — preferably American English. SI units should be used. If you are not a native English speaker, you may want to utilize an external or Whioce Publishing’s optional professional language editing service before submitting the final version.

  • Whioce Publishing Pte Ltd offers its own professional editing services. By using this service, you can be sure that your English-language manuscript will be polished and ready for submission to your publication of choice at a very reasonable price. For further details about the Language Editing Services, please contact us at editorial@whioce.com. Please note that utilizing a language editing service is not a guarantee of acceptance.

  • Revised manuscripts must contain a detailed point by point response to the comments of the reviewers. The response to reviewers has to be uploaded as a separate file.

  • If you withdraw your manuscript after it has been accepted (but not yet published), you will be charged for costs incurred at USD200.

  • Authors are expected to have minimum amount of post-acquisition processing of data. In case of processing; alterations must be applied to the entire image (e.g., brightness, contrast, color balance). Any kind of alteration if being done has to be clearly stated in the figure legend and in Methods section.

    Grouping of data (e.g., cropping of images of removal of lanes from gels and bolts) must be made apparent and should be explicitly indicated in the appropriate figure legends. Data comparisons should only be made from comparative experiments, and individual data should not be utilized across multiple figures. If inappropriate image/data manipulation is identified after publication, we reserve the right to ask for the original data and, if that is not satisfactory, to issue a correction or retract the paper, as appropriate.

  • Whioce Publishing will preserve e-journals with Portico, ensuring that they will be secure and available into the future.

  • Author Guidelines

    Before submitting for publication, please check that your manuscript has been prepared in accordance to the step-by-step instructions for submitting a manuscript to our online submission system.

    Manuscript Format

    Your manuscript should be in MS Word or LaTeX format. You are advised to download the template when preparing your submissions to this journal. All manuscripts must be written in clear, comprehensible English. Both British and American English are accepted. Usage of non-English words should be kept to a minimum and all must be italicized, with the exception of “e.g.” and “i.e.” If you have concerns about the level of English in your submission, please ensure that it is proofread before submission by a native English speaker or a scientific editing service.

    Types of submission accepted:

    Materials Science: Materials Review accepts original articles, reviews, letters, editorials, commentaries, perspectives and position papers. Please read this section further for the definition of each type and select the appropriate option in the submission system. Submissions exceeding the suggested requirements, such as total manuscript length, will still be processed for consideration and peer review. However, article processing charges will differ in exceptional cases (e.g. a raw text file exceeding 2MB, etc.) The article processing charge will then be determined on a case-by-case basis.

    Original articles: Scientific articles on original basic and applied research and/or analysis. This manuscript type typically has 5 tables and figures in total, and has approximately 40 references and 7,000 words (inclusive of reference list and abstract).

    Review articles: A summary highlighting recent developments and current/future trends of the field. This manuscript type typically has 5 tables and figures in total, with approximately 70 references and 7,000 words (inclusive of reference list and abstract).

    Letters to the Editor-in-Chief/authorship (please specify): Comments from reader(s) about individual articles. These letters must be constructive and contribute to the development of individual articles published or the entire journal. Letters containing new ideas, supporting data or data criticizing an article may be subjected to peer-review (determined on a case-by-case basis by the journal’s editorial team) and published in the online publication but not in the printed version. This manuscript type typically has 1,800 words (exclusive of reference list).

    Editorials: Solicited concise commentary highlighting prominent topics in the Journal’s issue. These are the official opinions of the editors of the journal or its special issue. Editorials will be published in both online and printed versions of the journal. This manuscript type typically has 3,500 words.

    Commentaries: Unsolicited commentaries or analysis from reader(s) targeting specific published articles in the journal. Commentaries will be subjected to peer-review and may be published in both online and printed versions of the journal. This manuscript type typically has 3,500 words.

    Perspectives: These are author’s personal opinion on a subject/topic. Unlike Reviews, Perspective articles may cover a more specific, narrow part of the field. However, these are still required to uphold the spirit of academia of being objective as well as aiming to initiate or furthering discussions and novel experimental procedures in the field. Therefore, it will undergo peer review and be indexed if accepted. Accepted articles may be solicited or unsolicited. This manuscript type typically has 5 tables and figures in total, along with approximately 70 references and 7,000 words (inclusive of reference list and abstract).

    Reports: Documents that summarize the execution and results of a clinical case involving collaborative research programme that is directly related to the advancement of material science. Submissions will be evaluated on a case-by-case basis and are usually solicited by the editors.

    Position papers: Submissions that reflect the official opinion of an organization (e.g. government bodies, funding agencies, etc.) This manuscript type typically has 3,500 words.

    Cover letter

    All submissions should include a cover letter as a separate file. A cover letter should contain a brief explanation of what was previously known, the conceptual advancement with the findings and its significance to broad readership. The cover letter is confidential and will be read only by the editors. It will not be seen by reviewers.

    Title

    The title should capture the conceptual significance for a broad audience. The title should not be more than 50 words and should be able to give readers an overall view of the paper’s significance. Titles should avoid using uncommon jargons, abbreviations and punctuation.

    List of Authors

    The names of authors must be spelled out rather than set in initials along with their affiliations. Authors should be listed according to the extent of their contribution, with the major contributor listed first. All corresponding authors should be identified with an asterisk. Affiliations should contain the following core information: department, institution, city, state, postal code, and country. For contact, email address of at least one corresponding author must be included. Please note that all authors must view and approve the final version of the manuscript before submitting.

    Abstract

    Articles must include an abstract containing a maximum of 200 words. The purpose of abstract is to provide sufficient information for a reader to determine whether or not to proceed to the full text of the article. After the abstract, please give 5 keywords; please avoid using the same words as those already used in the title, separate terms with a semi-colon (term1; term2; term3).

    Section Headings

    Please number the section headings (e.g. 1234, etc.) in boldface. Likewise, use boldface to identify subheadings too but please distinguish it from major headings using numbers (e.g. 1.11.22.12.2, etc.) Further subsections of subheadings should be differentiated by boldface and italics font with the numbers (1)(2)(3), etc.

    Introduction

    The introduction should provide a background that gives a broad readership an overall outlook of the field and the research performed. It tackles a problem and states its important regarding with the significance of the study. Introduction can conclude with a brief statement of the aim of the work and a comment about whether that aim was achieved.

    Materials and Methods

    This section provides the general experimental design and methodologies used. The aim is to provide enough detail to for other investigators to fully replicate the results. It is also required to facilitate better understanding of the results obtained. Protocols and procedures for new methods must be included in detail for the reproducibility of the experiments. Informed consent should be obtained from patients or parents before the experiments start and should be mentioned in this section.

    Ethics

    Ethics information includes IACUC permit numbers and/or IRB name, if applicable. This information should be included in a subheading labelled "Ethics Statement" in the "Methods" section of the manuscript file, in as much detail as possible.

    Results

    This section can be divided into subheadings and focuses on the results of the experiments performed.

    Discussion

    This section should provide the significance of the results and identify the impact of the research in a broader context. It should not be redundant or similar to the content of the results section.

    Conclusion

    Please use the conclusion section for interpretation only, and not to summarize information already presented in the text or abstract.

    Conflict of Interest

    All authors are required to declare all activities that have the potential to be deemed as a source of competing interest in relations to their submitted manuscript. Examples of such activities could include personal or work-related relationships, events, etc. Authors who have nothing to declare are encouraged to add "No conflict of interest was reported by all authors" in this section.

    Funding

    Authors should declare all financial and non-financial support that have the potential to be deemed as a source of competing interest in relations to their submitted manuscript in this section. Financial supports are generally in the form of grants, royalties, consulting fees and others. Examples of non-financial support could include the following: externally-supplied sources, writing assistance, administrative support, contributions from non-authors, etc.

    Appendix

    This section is optional and is for all materials (e.g. advanced technical details) that has been excluded from the main text but remain essential to the readers in understanding the manuscripts. This section is not for supplementary figures. Authors are advised to refer to the section on Supplementary Figures for such submissions.

    Text

    The text of the manuscript should be in Microsoft Word or Latex. The length of the manuscript cannot be more than 50,000 characters (inclusive of spaces), or approximately 7,000 words.

    Nomenclature for genes and proteins

    This journal aims to reach researchers all over the globe. Hence, for reviewers’ and readers’ ease in comprehension, authors are highly encouraged to use the appropriate gene and protein nomenclature. Authors may prefer to utilize resources such as http://www.ncbi.nlm.nih.gov/gene.

    Figures

    Authors should include all figures into the manuscript and submit it as one file. Figures include photographs, scanned images, graphs, charts and schematic diagrams. Figures submitted should avoid unnecessary decorative effects (e.g. 3D graphs), as well as should be minimally processed (e.g. changes in brightness and contrast applied uniformly for the entire figure). It should also be set against a white background. Please remember to label all figures (e.g. axis, etc.) and add captions below the figure, as required. These captions should be numbered (e.g. Figure 1Figure 2, etc.) in boldface. All figures must have a brief title (also known as caption) that describes the entire figure without citing specific panels, followed by a legend, defined as description of each panel. Please identify each panel with uppercase letters in parenthesis (e.g. (A), (B), (C), etc.)

    The preferred file formats for any separately submitted figure(s) are TIFF or JPEG. All figures should be legible in print form and of optimal resolution. Optimal resolutions preferred are 300 dots per inch (dpi) for RBG coloured, 600 dpi for greyscale and 1,200 dpi for line art. Although there are no file-size limitation imposed, authors are highly encouraged to compress their figures to an ideal size without unduly affecting the legibility and resolution of figures. This will also speed up the process of uploading in the submission system, if necessary.

    The Editor-in-Chief and Publisher reserve the right to request from author(s) the high-resolution files and unprocessed data and metadata files, should the need arise at any point after manuscript submission for reasons such as production, evaluation or other purposes. The file name should allow for ease in identifying the associated manuscript submitted.

    Tables, lists and equations

    Tables created using Microsoft Word table function are preferred. The tables should include a title at the top. Titles and footnotes/legends should be concise. These must be submitted in the manuscript. Likewise, lists and equations should be properly aligned and its meaning clear to readers. For listing items within the main body of the manuscript, please use Roman numbers in parenthesis (e.g. (i), (ii), (iii), (iv), etc.).

    Supplementary information

    This section is optional and contains all materials and figures that have been excluded from the entire manuscript. These information are relevant to the manuscript but remain non-essential to readers’ understanding of the manuscript’s main content. All supplementary information should be submitted as a separate file in Step 4 during submission. Please ensure the names of such files contain ‘suppl. info’. Videos may be included in this section.

    In-text citations

    Reference citations in the text should be numbered consecutively in superscript square brackets. Some examples:

    1. Negotiation research spans many disciplines[3,4].
    2. This result was later contradicted by Becker and Seligman[5].
    3. This effect has been widely studied[1–3,7].

    Personal communications and unpublished works can only be used in the main text of the submission and are not to be placed in the Reference section. Authors are advised to limit such usage to the minimum. These should also be easily identifiable by stating the authors and year of such unpublished works or personal communications, and the word ‘Unpublished’ in parenthesis.

    E.g. (Smith J, 2000, Unpublished)

    References

    This section is compulsory and should be placed at the end of all manuscripts. Do not use footnotes or endnotes as a substitute for a reference list. The list of references should only include works that are cited in the text and that have been published or accepted for publication. Personal communications and unpublished works should be excluded from this section.

    For the reference list, all authors must be stated. Authors being referenced are listed with their surname followed by their initials. All references should be numbered (e.g. 1, 2, 3, etc.) and sequenced according to the order they appear as the in-text citations. References should follow the following pattern: Author(s), followed by year of publication, title of publication, abbreviated journal name in italics, volume number, issue number in parenthesis and lastly, page range. If the referred article has more than three authors, list only the first three authors and abbreviate the remaining authors as the italicized ‘et al.’ (meaning "and others"). If the DOI is available, please include it after the page range. Examples of references for different types of publications are as follows.

  • The names and email addresses entered in this journal site will be used exclusively for the stated purposes of this journal and will not be made available for any other purpose or to any other party.

Article Processing Charges (APC)

Materials Science: Materials Review is an Open Access Journal under Whioce Publishing. All articles published in Materials Science: Materials Review are accessible electronically from the journal website without commencing any kind of payment. In order to ensure contents are freely available and maintain publishing quality, Article Process Charges (APC) is applicable to all authors who wish to submit their articles to the journal to cover the cost incurred in processing the manuscripts. Such cost will cover the peer-review, copyediting, typesetting, publishing, content depositing and archiving processes. Those charges are applicable only to authors who have their manuscript successfully accepted after peer-review.

Journal TitleAPC
Materials Science: Materials Review$800

We encourage authors to publish their papers with us and don’t wish the cost of article processing fees to be a barrier especially to authors from the low and lower middle income countries/regions. A range of discounts or waivers are offered to authors who are unable to pay our publication processing fees. Authors can write in to apply for a waiver and requests will be considered on a case-by-case basis.

Authors based in these countries/regions listed below may apply to receive up to a 50%-100% waiver of the standard article processing fee; Waiver subjected to approval.

  • Afghanistan
  • Armenia
  • Bangladesh
  • Benin
  • Bhutan
  • Bolivia
  • Burkina Faso
  • Burundi
  • Cabo Verde
  • Cambodia
  • Cameroon
  • Central African Republic
  • Chad
  • Comoros
  • Congo, Dem. Rep
  • Congo, Rep.
  • Côte d'Ivoire
  • Djibouti
  • Egypt, Arab Rep.
  • El Salvador
  • Eritrea
  • Ethiopia
  • Gambia, The
  • Ghana
  • Guatemala
  • Guinea
  • Guinea-Bissau
  • Haiti
  • Honduras
  • India
  • Indonesia
  • Kenya
  • Kiribati
  • Korea, Dem. People's Rep.
  • Kosovo
  • Kyrgyz Republic
  • Lao PDR
  • Lesotho
  • Liberia
  • Madagascar
  • Malawi
  • Mali
  • Mauritania
  • Micronesia, Fed. Sts.
  • Moldova
  • Mongolia
  • Morocco
  • Mozambique
  • Myanmar
  • Nepal
  • Nicaragua
  • Niger
  • Nigeria
  • Pakistan
  • Papua New Guinea
  • Philippines
  • Rwanda
  • Samoa
  • São Tomé and Principe
  • Senegal
  • Sierra Leone
  • Solomon Islands
  • Somalia
  • South Sudan
  • Sri Lanka
  • Sudan
  • Swaziland
  • Syrian Arab Republic
  • Tajikistan
  • Tanzania
  • Timor-Leste
  • Togo
  • Tonga
  • Tunisia
  • Uganda
  • Ukraine
  • Uzbekistan
  • Vanuatu
  • Vietnam
  • West Bank and Gaza
  • Yemen, Rep.
  • Zambia
  • Zimbabwe

If you are residing in one of the above mentioned countries and need to apply for a waiver, please email our editorial department (editorial@whioce.com) with the following information:

  • Your name and institution with full address details
  • Title of journal you wish to submit a manuscript to
  • Reason for applying for a waiver
  • Title of your paper
  • Country of residence of all co-author

APC Payment

Payments for APC of this journal can be made through our online PayPal payment gateway. Enter the article no. into the below textbox and select "Pay Now" to proceed with payment.

Article No.

*Article No. is mandatory for payment and it can be found on the acceptance letter issued by the Editorial Office. Payment without indicating Article No. will result in processing problem and delay in article processing. Please note that payments will be processed in USD. You can make payment through Masters, Visa or UnionPay card.

Frequently Asked Questions

  • Answer: To establish whether your paper is suitable for this journal, please read Focus and Scope under Editorial Policies.
  • Answer: Registration and login are required to submit manuscript online and to check the status of current submission.
  • Answer: The submission file can be submitted in OpenOffice, Microsoft Word, RTF, or WordPerfect document file format.
  • Answer: The length of the manuscript cannot be more than 8000 words.
  • Answer: The cover letter is necessary for each submission. The cover letter should be uploaded as a separate file in Step 4 during the submission. The contents of the cover letter should include brief explanation of what was previously known, the conceptual advancement with the findings and its significance to broad readership. The cover letter will only be visible to the editor. Reviewers will not have access to the cover letter.
  • Answer: You can suggest 2 reviewers for your submission. However, the decision of whether to invite them lies with the Editor.
  • Answer: This journal provides immediate open access to its content on the principle that making research freely available to the public supports a greater global exchange of knowledge. Refer to the Publication Fees tab for more details.

Announcements

 

Call-for-Papers

 

Whioce Publishing Pte Ltd  and the Editor-in-chief invite all authors  to submit their  manuscripts to  our  newly launched  journal, Materials Science: Materials Review, for peer review.

 
Posted: 2017-06-08
 
More Announcements...