Progress of Electrical and Electronic Engineering

ISSN: 2630-4643 (Online)

Journal Abbreviation: Prog Electr Electr Eng

Publication Frequency: quarterly

Article Processing Charges (APC): Click here for more details

Publishing Model: Open Access

Journal no: 31P

About the Journal

Progress of Electrical and Electronic Engineering is an international Open Access journal that publishes original research articles and review articles related to all areas of electrical and electronic engineering. The scope of this journal includes power generation, power usage and energy production.

Recently Published Articles

Articles

Parfentiev Nikolay Andreevich
10 Views, 11 PDF Downloads

A special point was found in the frequency characteristics of the oscillatory circuit, which was not mentioned earlier in textbooks on electrical engineering and radio engineering. The module of complex resistance of the circuit does not depend on the value of the active resistance at a frequency less than  times that of the resonance. The material is of interest to all engineers and scientists specializing in electrical engineering. On its basis, new methods for measuring the parameters of electrical circuits can be developed. Physical interpretation of the phenomenon doesn't exist at the moment.

PDF

Articles

Yu-Ling He 1, Qing-Fa Meng 1, Ping Wang 2, Ming-Xing Xu 1
8 Views, 14 PDF Downloads

In order to study the impacts of the stator magnetic pull per unit area (MPPUA) characteristics under different field winding inter-turn short-circuit (FWISC) degrees in generator, comparative study of 3D numerical simulations and experiments are respectively taken to calculate the quantitative data of stator MPPUA by finite-element method (FEM) in this paper. Firstly, the nature exciting force of stator vibration, which is called MPPUA, is carried out. Then simulations data on MPPUA under normal condition and different short-circuit degrees are obtained. Finally, the variation rules of MPPUA characteristics by experiments under different conditions are studied. The results show that in normal condition the main harmonic components of MPPUA consist of only 6th-harmonic component. However, the occurrence of FWISC will bring in extra 1st, 2nd, 3rd, 4th and 5th-harmonic components to MPPUA. Meanwhile, with the increasing of the rotor short circuit degrees, the amplitudes of 1st, 2nd, 3rd, 4th and 5th-harmonic components will present an increasing trend. However, the amplitudes of 6th-harmonic component will present a decrease trend.

PDF

Articles

Wenbin Qiu
11 Views, 132 PDF Downloads

With the continuous development of diesel locomotives in the direction of single power, the heat dissipation of
the locomotive cooling system is getting bigger and bigger, and its performance directly affects the economy and
reliability of the locomotive. Due to the limitation of locomotive axle load and structural space size, there is a great
technical problem between the cooling system design and the arrangement of the cooling device and the overall
layout of the locomotive. The increase in the number of radiators, making the number of cooling system processes
are correspondingly increased, resulting in locomotive cooling system water resistance and water system pressure are
greatly improved. The traditional cooling system form and the radiator structure are diffi cult to meet the development
requirements of high power locomotive. Based on the conventional cooling system design method, a multi-process
radiator is proposed. The multi-process cooling system has the advantages of high cooling effi ciency, simple structure,
small auxiliary power consumption of the pump and high reliability of the cooling system components. In this paper,
the cooling system and its function, the existing cooling technology and the multi-process radiator are studied and
analyzed, and the three-process radiator and the single-process radiator are tested and compared. In this paper, a new
multi-process radiator structure scheme is proposed for the design requirements of CKD9 diesel locomotive cooling
system. The program eff ectively uses the radiator cooling water and cooling air temperature diff erence, to achieve the
purpose of increasing heat dissipation.

PDF

Articles

Yueshan Lin
9 Views, 26 PDF Downloads

In the information age, components in all kinds of electronic products occupy an important position, in particular, some
common electronic components, electronic products is essential to the basic material. The performance of various types
of components, features, the use of the scope of the function of the electronic product design and manufacturing has
a very important role especially in the past period. Along with the rapid development of the electronics industry, new
requirements and components industry is also constantly using new materials. New technology has introduced new
products for the development of electronic products to open up new ways. This chapter will be a number of commonly
used electronic components according to its type, performance characteristics and testing. As a brief introduction and
strive to have a wide range of components have a general understanding in order to facilitate product design and expand
the range of components used.

PDF

Articles

Sihong Pan
8 Views, 27 PDF Downloads

Based on the design of labview battery parameter analyzer, this problem is a problem worthy of further study. The
main content of this thesis is to use labview software to design a program, through DAQmx will be in the physical
data (the battery of various parameters, such as: voltage, current, etc.) into the computer, through the already designed
program to measure various parameters of the battery. My main goal this time is to measure the battery's power.
Therefore, I need to measure the actual circuit by the battery voltage changes, current changes, and the time spent by
the software in the program analysis to calculate the battery actually have the power. Not only to calculate the total
power, but also to calculate the power per minute per second, and through the chart displayed. The biggest feature of
this topic is the theoretical design is more important, hardware devices and devices is not too complicated, of course,
only relatively speaking, so the biggest feature of this topic is that I designed the software program, the main function
is refl ected in the program Among them, the hardware device only played a supporting role.

PDF

Articles

Zhiyong Lu
10 Views, 31 PDF Downloads

In China, the current use of box-type substation is widespread, all walks of life are in use, box-type substation, also
known as outdoor complete substation, is the high voltage power, transformer buck, low voltage distribution and other
functions organically combined, It is suitable for use in economic development zones where the load is concentrated,
and it is suitable for the economic development zone, the factory, the factory building, the factory building, the factory
building, the factory building, Mines, residential quarters and other urban public facilities, the user can be based on
diff erent conditions of use, load level selection box-type substation.

PDF

Articles

Guanghui Wei
10 Views, 66 PDF Downloads

The trend of automobile development is safety, energy saving and environmental protection. Due to the development
and application of new technologies such as electronic technology, computer technology and information technology,
the electronic control of automobile has made great progress in the control precision, scope, adaptability and
intelligence and realized the fully optimized operation of the automobile. Therefore, in the reduction of emissions,
reduce fuel consumption, improve safety and comfort and many other aspects of electronic control technology has
obvious advantages. This is bound to require a large number of sensors in the car. These miniature sensors are small
enough to enable a wide range of new features, high-volume and high-precision production, low cost and easy to form
large-scale and multi-function arrays that make them ideal for automotive applications.

PDF
Read more

Indexing and Archiving

Progress of Electrical and Electronic Engineering (PEEE) aims to be indexed by world-recognized databases, for example, PubMed, Scopus and Science Citation Index (SCI). 

Editorial Board

Click here to see the editorial board.

Focus and Scope

Progress of Electrical and Electronic Engineering is an international Open Access journal that publishes original research articles and review articles related to all areas of electrical and electronic engineering. The scope of this journal includes power generation, power usage and energy production.

For Authors

  • A manuscript would not be accepted if it has been published or is currently under consideration for publication in any other journals. The author will need to notify the editorial team if the data in their submission has been presented in conferences.

  • Authorship should be limited to people who have contributed substantially to the work. Authors must indicate their specific contributions to the published work. This information should be listed in the manuscript under the section ‘Author Contribution’. Examples of contributions include: designed research, performed research, contributed new reagents or analytic tools, analyzed data, wrote the paper.

    For more information on submission’s format, please refer to the ‘Author Guidelines’ link accessible from the ‘About’ button at the top row of this page.

    The corresponding author should be clearly indicated for all manuscripts submitted. A maximum of two corresponding authors are allowed for the responsibilities associated. The corresponding author(s) is responsible for:

    • Obtaining permission from all the authors mentioned in the manuscript
    • Ensuring adherence to all editorial and submission policies and for any communications and actions that may be necessary after publication
    • Including written permission from the authors of the work concerned for any mention of any unpublished material included in the manuscript, e.g. data from manuscripts-in-press, personal communication, or work in preparation.
  • The author has to provide the authorization of no conflict with any financial body or funding agency that might influence the results or interpretation of their manuscript. All authors, members, reviewers and editors must disclose any association that poses a conflict of interest in connection with the manuscript. The corresponding author will be asked to sign a form behalf of all of the authors regarding potential conflicts of interest at the time of acceptance.

  • The editorial team does not approve of any plagiarism attempts. iThenticate will be utilized at the editor’s discretion to verify the originality of submitted manuscripts. If plagiarism is detected during the review process the manuscript may be rejected pending the severity of plagiarism. Therefore, if a manuscript uses a text copied directly from another source, this text must be written in quotation marks and the original source must be cited.

  • All articles must be written in English — preferably American English. SI units should be used. If you are not a native English speaker, you may want to utilize an external or Whioce Publishing’s optional professional language editing service before submitting the final version.

  • Whioce Publishing Pte Ltd offers its own professional editing services. By using this service, you can be sure that your English-language manuscript will be polished and ready for submission to your publication of choice at a very reasonable price. For further details about the Language Editing Services, please contact us at editorial@whioce.com. Please note that utilizing a language editing service is not a guarantee of acceptance.

  • Revised manuscripts must contain a detailed point by point response to the comments of the reviewers. The response to reviewers has to be uploaded as a separate file.

  • If you withdraw your manuscript after it has been accepted (but not yet published), you will be charged for costs incurred at USD200.

  • Authors are expected to have minimum amount of post-acquisition processing of data. In case of processing; alterations must be applied to the entire image (e.g., brightness, contrast, color balance). Any kind of alteration if being done has to be clearly stated in the figure legend and in Methods section.

    Grouping of data (e.g., cropping of images of removal of lanes from gels and bolts) must be made apparent and should be explicitly indicated in the appropriate figure legends. Data comparisons should only be made from comparative experiments, and individual data should not be utilized across multiple figures. If inappropriate image/data manipulation is identified after publication, we reserve the right to ask for the original data and, if that is not satisfactory, to issue a correction or retract the paper, as appropriate.

  • Whioce Publishing will preserve e-journals with Portico, ensuring that they will be secure and available into the future.

  • Author Guidelines

    Author Guidelines

    Before your submission, please check that your manuscript has been prepared in accordance to the step-by-step instructions for submitting a manuscript to our online submission system.

    Manuscript Format

    Your manuscript should be in MS Word format. All manuscripts must be written in clear, comprehensible English. Both British and American English are accepted. Usage of non-English words should be kept to a minimum and all must be italicized with the exception of “e.g.”, “i.e.” and “etc.” If you have concerns about the level of English in your submission, please ensure that it is proofread before submission by a native English speaker or a scientific editing service.

    Cover Letter

    All submissions should include a cover letter as a separate file. A cover letter should contain a brief explanation of what was previously known, the conceptual advancement with the findings and its significance to broad readership. The cover letter is confidential and will be read only by the editors. It will not be seen by reviewers.

    Title

    The title should capture the conceptual significance for a broad audience. The title should not be more than 50 words and should be able to give readers an overall view of the paper’s significance. Titles should avoid using uncommon jargons, abbreviations and punctuation.

    List of Authors

    The names of authors must be spelled out rather than set in initials along with their affiliations. Authors should be listed according to the extent of their contribution, with the major contributor listed first. All corresponding authors should be identified with an asterisk. Affiliations should contain the following core information: department, institution, city, state, postal code, and country. For contact, email address of at least one corresponding author must be included. Please note that all authors must see and approve the final version of the manuscript before submitting.

    Abstract

    Articles must include an abstract containing a maximum of 200 words. The purpose of abstract is to provide sufficient information for a reader to determine whether or not to proceed to the full text of the article. After the abstract, please give 5–8 key words; please avoid using the same words as those already used in the title.

    Text

    The text of the manuscript should be in Microsoft Word. The length of the manuscript cannot be more than 50,000 characters (inclusive of spaces) or approximately 7,000 words.

    Section Headings

    Please number the section headings (e.g. 1, 2, 3, 4, etc.) in boldface. Likewise, use boldface to identify subheadings too but please distinguish it from major headings using numbers (e.g. 1.1, 1.2, 2.1, 2.2, etc.) Further subsections of subheadings should be differentiated with the numbers 1.1.1, 1.1.2, 2.1.1, 2.1.2, etc.

    Introduction

    Introduction should provide a background that gives a broad readership an overall outlook of the field and the research performed. It tackles a problem and states its importance regarding the significance of the study. Introduction can conclude with a brief statement of the aim of the work and a comment about whether that aim was achieved.

    Materials and Methods

    This section provides the general experimental design and methodologies used. The aim is to provide enough details for other investigators to fully replicate your results. It is also required to facilitate better understanding of the results obtained. Protocols and procedures for new methods must be included in detail to reproduce the experiments.

    Results

    This section can be divided into subheadings. This section focuses on the results of the experiments performed.

    Discussion

    This section should provide the significance of the results and identify the impact of the research in a broader context. It should not be redundant or similar to the content of the results section.

    Conclusion

    Please use the conclusion section for interpretation only, and not to summarize information already presented in the text or abstract.

    Conflict of Interest

    All authors are required to declare all activities that have the potential to be deemed as a source of competing interest in relations to their submitted manuscript. Examples of such activities could include personal or work-related relationships, events, etc. Authors who have nothing to declare are encouraged to add "No conflict of interest was reported by all authors" in this section.

    Funding and Acknowledgements

    Authors should declare all financial and non-financial support that have the potential to be deemed as a source of competing interest in relations to their submitted manuscript in this section. Financial supports are generally in the form of grants, royalties, consulting fees and more. Examples of non-financial support could include the following: externally-supplied equipments/biological sources, writing assistance, administrative support, contributions from non-authors etc.

    Appendix

    This section is optional and is for all materials (e.g. advanced technical details) that has been excluded from the main text but remain essential to readers in understanding the manuscripts. This section is not for supplementary figures. Authors are advised to refer to the section on ‘Supplementary figures’ for such submissions.

    Figures

    Authors should include all figures into the manuscript and submit it as one file in the OJS system. Reference to the “Instructions for Typesetting Manuscript” is strongly encouraged. Figures include photographs, scanned images, graphs, charts and schematic diagrams. Figures submitted should avoid unnecessary decorative effects (e.g. 3D graphs) as well as be minimally processed (e.g. changes in brightness and contrast applied uniformly for the entire figure). It should also be set against a white background. Please remember to label all figures (e.g. axis etc.) and number them (e.g. Figure 1, Figure 2, etc.) in boldface. Please also add in captions (below the figure) as required and number them (e.g. Figure 1, Figure 2, etc.) in boldface. The caption should describe the entire figure without citing specific panels, followed by a legend defined as description of each panel. Please identify each panel with uppercase letters in parenthesis (e.g. (A), (B), (C), etc.)

    The preferred file formats for any separately submitted figure(s) are TIFF or JPEG. All figures should be legible in print form and of optimal resolution. Optimal resolutions preferred are 300 dots per inch for RBG colored, 600 dots per inch for greyscale and 1200 dots per inch for line art. Although there are no file size limitation imposed, authors are highly encouraged to compress their figures to an ideal size without unduly affecting legibility and resolution of figures. This will also speed up the process of uploading in the submission system if necessary.

    The Editor-in-Chief and Publisher reserve the right to request from author(s) the high-resolution files and unprocessed data and metadata files should the need arise at any point after manuscript submission for reasons such as production, evaluation or other purposes. The file name should allow for ease in identifying the associated manuscript submitted.

    Tables, Lists and Equations

    Tables created using Microsoft Word table function are preferred. The tables should include a title underneath. Titles and footnotes/legends should be concise. These must be submitted together with the manuscript. Likewise, lists and equations should be properly aligned and its meaning clear to readers. For listing things within the main body of the manuscript, please use Arabic numerals in parenthesis (e.g. (1), (2), (3), (4), etc.)

    Supplementary Information

    This section is optional and contains all materials and figures that have been excluded from the entire manuscript. These materials are relevant to the manuscript but remain non-essential to readers’ understanding of the manuscript’s main content. All supplementary information should be submitted as a separate file in Step 4 during submission. Please ensure the names of such files contain ‘suppl. info’. Videos may be included in this section.

    In-text citations

    Reference citations in the text should be numbered consecutively in superscript square brackets. Some examples:

    a) Negotiation research spans many disciplines[3, 4].

    b) This result was later contradicted by Becker and Seligman[5].

    c) This effect has been widely studied[1–3, 7].

    Personal communications and unpublished works can only be used in the main text of the submission and are not to be placed in the Reference section. Authors are advised to limit such usage to the minimum. They should also be easily identifiable by stating the authors and year of such unpublished works or personal communications and the word ‘Unpublished’ in parenthesis. E.g. (Smith J, 2000, Unpublished)

     

    References

    This section is compulsory and should be placed at the end of all manuscripts. Do not use footnotes or endnotes as a substitute for a reference list. The list of references should only include works that are cited in the text and that have been published or accepted for publication. Personal communications and unpublished works should be excluded from this section.

    References should be numbered consecutively in the order in which they are first mentioned in the text. Identify references in text, tables, and legends by Arabic numerals in parentheses. Authors referenced are listed with their surname followed by their initials. All references should also appear as an in-text citation. References should follow the following pattern: Author(s), title of publication, full journal name in italics followed by year of publication, volume number, issue number in parenthesis and lastly, page range. If the referred article has more than three authors, list only the first three authors and abbreviate the remaining authors to italicized ‘et al.’ (meaning: "and others"). If the DOI is available, please include it after the page range.

    Standard journal article

    Journal article (print) with one to three authors

    Halpern SD, Ubel PA. Solid-organ transplantation in HIV-infected patients. The New England Journal of Medicine 2002 Jul 25;347(4):284-7.

    Journal article (print) with more than three authors

    Rose ME, Huerbin MB, Melick J, et al. Regulation of interstitial excitatory amino acid concentrations after cortical contusion injury. Brain Research 2002;935(1-2):40-6.

    Journal article (online) with one to three authors

    Jackson D, Firtko A and Edenborough M. Personal resilience as a strategy for surviving and thriving in the face of workplace adversity: A literature review. Journal of Advanced Nursing 2007; 60(1):1–9. http://dx.doi.org/10.1111/j.1365-2648.2007.04412.x.

    Journal article (online) with more than three authors

    Hargreave M, Jensen A, Nielsen TSS, et al. Maternal use of fertility drugs and risk of cancer in children—A nationwide population-based cohort study in Denmark. International Journal of Cancer 2015; 136(8): 1931–1939. http://dx.doi.org/10.1002/ijc.29235.

    Book

    Book with one to three authors

    Schneider Z, Whitehead D and Elliott D. Nursing and Midwifery Research: Methods and Appraisal for Evidence-based Practice, 3rd ed. Marrickville, NSW: Elsevier Australia; 2007.

    Book with more than three authors

    Davis M, Charles L, Curry M J, et al. Challenging Spatial Norms, London: Routledge; 2003.

    Chapter or Article in Book

    Meltzer PS, Kallioniemi A, Trent JM. Chromosome alterations in human solid tumors. In: Vogelstein B, Kinzler KW, editors. The genetic basis of human cancer. New York: McGraw-Hill; 2002. p. 93-113.

    *Note that the editor’s name is not inverted.

    Others

    Proceedings of meetings and symposiums, conference papers

    Christensen S, Oppacher F. An analysis of Koza's computational effort statistic for genetic programming. In: Foster JA, Lutton E, Miller J, Ryan C, Tettamanzi AG, editors. Genetic programming. EuroGP 2002: Proceedings of the 5th European Conference on Genetic Programming; 2002 Apr 3-5; Kinsdale, Ireland. Berlin: Springer; 2002. p. 182-91.

    Conference proceedings (from electronic database)

    Harnden P, Joffe JK, Jones WG, editors. Germ cell tumours V. Proceedings of the 5th Germ Cell Tumour Conference; 2001 Sep 13-15; Leeds, UK. New York: Springer; 2002.

    Online Document with author names

    Este J, Warren C, Connor L, et al. Life in the clickstream: The future of journalism. Media Entertainment and Arts Alliance. 2008; Retrieved from http://www.alliance.org.au/documents/ foj_report_final.pdf

    Online Document without author name

    Princeton Writing Program. (n.d.). Developing an argument. Retrieved from http://web.princeton.edu/ sites/ writing/Writing_Center/WCWritingResources.htm

    Thesis/Dissertation

    Borkowski MM. Infant sleep and feeding: a telephone survey of Hispanic Americans [dissertation]. Mount Pleasant (MI): Central Michigan University; 2002.

    Standards

    Standards Australia Online. Glass in buildings: Selection and installation. AS 1288-2006, amended January 31, 2008. Retrieved from SAI Global database 2006.

    Government Report

    National Commission of Audit. Report to the Commonwealth Government, Canberra: Australian Government Publishing Service 1996.

    Government report (online)s

    Department of Health and Ageing.Ageing and aged care in Australia; 2008. Retrieved from http://www.health.gov.au/internet/ main/publishing.nsf/Content/ageing

    Patent

    Rencher W F. Bioadhesive pharmaceutical car- rier. US Patent 5462749 A. 1995.

    No author

    Guide to agricultural meteorological practices, 2nd ed. Secretariat of the World Meteorological Organization, Geneva; 1981.

    Note: When referencing an entry from a dictionary or an encyclopedia with no author there is no requirement to include the source in the reference list. In these cases, only cite the title and year of the source in-text. For an authored dictionary/encyclopedia, treat the source as an authored book.

     

  • Authors contributing to Whioce Publishing Pte. Ltd. agree to publish their articles under the Creative Commons Attribution-Noncommercial 4.0 International License, allowing third parties to share their work (copy, distribute, transmit) and to adapt it, under the condition that the authors are given credit, that the work is not used for commercial purposes, and that in the event of reuse or distribution, the terms of this license are made clear.
  • The names and email addresses entered in this journal site will be used exclusively for the stated purposes of this journal and will not be made available for any other purpose or to any other party.

Article Processing Charges (APC)

Progress of Electrical and Electronic Engineering is an Open Access Journal under Whioce Publishing. All articles published in Progress of Electrical and Electronic Engineering are accessible electronically from the journal website without commencing any kind of payment. In order to ensure contents are freely available and maintain publishing quality, Article Process Charges (APC) is applicable to all authors who wish to submit their articles to the journal to cover the cost incurred in processing the manuscripts. Such cost will cover the peer-review, copyediting, typesetting, publishing, content depositing and archiving processes. Those charges are applicable only to authors who have their manuscript successfully accepted after peer-review.

Journal TitleAPC
Progress of Electrical and Electronic Engineering$800

We encourage authors to publish their papers with us and don’t wish the cost of article processing fees to be a barrier especially to authors from the low and lower middle income countries/regions. A range of discounts or waivers are offered to authors who are unable to pay our publication processing fees. Authors can write in to apply for a waiver and requests will be considered on a case-by-case basis.

Authors based in these countries/regions listed below may apply to receive up to a 50%-100% waiver of the standard article processing fee; Waiver subjected to approval.

  • Afghanistan
  • Armenia
  • Bangladesh
  • Benin
  • Bhutan
  • Bolivia
  • Burkina Faso
  • Burundi
  • Cabo Verde
  • Cambodia
  • Cameroon
  • Central African Republic
  • Chad
  • Comoros
  • Congo, Dem. Rep
  • Congo, Rep.
  • Côte d'Ivoire
  • Djibouti
  • Egypt, Arab Rep.
  • El Salvador
  • Eritrea
  • Ethiopia
  • Gambia, The
  • Ghana
  • Guatemala
  • Guinea
  • Guinea-Bissau
  • Haiti
  • Honduras
  • India
  • Indonesia
  • Kenya
  • Kiribati
  • Korea, Dem. People's Rep.
  • Kosovo
  • Kyrgyz Republic
  • Lao PDR
  • Lesotho
  • Liberia
  • Madagascar
  • Malawi
  • Mali
  • Mauritania
  • Micronesia, Fed. Sts.
  • Moldova
  • Mongolia
  • Morocco
  • Mozambique
  • Myanmar
  • Nepal
  • Nicaragua
  • Niger
  • Nigeria
  • Pakistan
  • Papua New Guinea
  • Philippines
  • Rwanda
  • Samoa
  • São Tomé and Principe
  • Senegal
  • Sierra Leone
  • Solomon Islands
  • Somalia
  • South Sudan
  • Sri Lanka
  • Sudan
  • Swaziland
  • Syrian Arab Republic
  • Tajikistan
  • Tanzania
  • Timor-Leste
  • Togo
  • Tonga
  • Tunisia
  • Uganda
  • Ukraine
  • Uzbekistan
  • Vanuatu
  • Vietnam
  • West Bank and Gaza
  • Yemen, Rep.
  • Zambia
  • Zimbabwe

If you are residing in one of the above mentioned countries and need to apply for a waiver, please email our editorial department (editorial@whioce.com) with the following information:

  • Your name and institution with full address details
  • Title of journal you wish to submit a manuscript to
  • Reason for applying for a waiver
  • Title of your paper
  • Country of residence of all co-author

APC Payment

Payments for APC of this journal can be made through our online PayPal payment gateway. Enter the article no. into the below textbox and select "Pay Now" to proceed with payment.

Article No.

*Article No. is mandatory for payment and it can be found on the acceptance letter issued by the Editorial Office. Payment without indicating Article No. will result in processing problem and delay in article processing. Please note that payments will be processed in USD. You can make payment through Masters, Visa or UnionPay card.

Frequently Asked Questions

  • Answer: To establish whether your paper is suitable for this journal, please read Focus and Scope under Editorial Policies.
  • Answer: Registration and login are required to submit manuscript online and to check the status of current submission.
  • Answer: The submission file can be submitted in OpenOffice, Microsoft Word, RTF, or WordPerfect document file format.
  • Answer: The length of the manuscript cannot be more than 8000 words.
  • Answer: The cover letter is necessary for each submission. The cover letter should be uploaded as a separate file in Step 4 during the submission. The contents of the cover letter should include brief explanation of what was previously known, the conceptual advancement with the findings and its significance to broad readership. The cover letter will only be visible to the editor. Reviewers will not have access to the cover letter.
  • Answer: You can suggest 2 reviewers for your submission. However, the decision of whether to invite them lies with the Editor.
  • Answer: This journal provides immediate open access to its content on the principle that making research freely available to the public supports a greater global exchange of knowledge. Refer to the Publication Fees tab for more details.