Wireless Communication Technology

Editor-in-ChiefMazliza Othman

ISSN: 2529-766X (Online)

Journal Abbreviation: Wirel Commun Technol

Publication Frequency: irregular

Article Processing Charges (APC): Click here for more details

Publishing Model: Open Access

Journal no: 19P

About the Journal

Wireless Communication Technology is an international Open Access journal that publishes original research articles and review articles related to all areas of wireless communication. Wireless Communication Technology focuses on research and development in wireless communications, mobile systems, coding theory, power consumption, dynamic spectrum allocation, multimedia, social networking and computing technologies.

Recently Published Articles

Original Research Articles

Pierre-Richard Cornely
7 Views, 9 PDF Downloads

The antenna face of a phased array radar typically consists of several hundred of antenna elements, and they degrade independently.  This poses a challenging problem to radar target detection, discrimination, and classification, which rely on adaptive beamforming and assume that the channels are matched to each other.  In this research, a channel equalization algorithm is developed compensating for the mismatch between the reference and testing channels using the least-squares error (LSE) criterion. The equalized output is precisely the projection of the reference channel data onto the columns of the equalization matrix, which is solely a function of the testing channel output.  Through the analysis of the equalization matrix, the performance metrics including the squares error, instantaneous correlation coefficient, and cancellation ratio (CR) of the proposed equalizer are expressed in closed forms.  The analysis also allows us to postulate on the effect of system parameters including: window size, equalizer length, and input signal-to-noise ratio (SNR) on the performance metrics. Extensive Monte Carlo simulations show that higher values of the equalizer length, input SNR, or window size improves the CR; however, once a system parameter approaches a certain threshold, further incrementing the size of these parameters has a diminishing return on system performance.  Simulations also reveal that an equalizer with good CR or correlation coefficient results into the equalized testing channel output being almost a replica of the reference channel’s output. Correspondingly, degradation in the CR or correlation coefficient affects the equalized testing channel output.  The simulation results agree closely with known theoretical analyses. The research in this paper demonstrates the importance of channel equalization and system parameter selection in obtaining a satisfactory antenna elements/subarrays output.


Original Research Articles

Du Xiaoyan
5 Views, 8 PDF Downloads

In the 1990s, the development of program-controlled switches in our country has experienced the development process from the
scratch; especially the successful development of large-scale program-controlled switches has brought great vitality to our information
industry. This time, I mainly introduced to ZTE ZXJ10 program-controlled switchboard to design distributed modularization in programcontrolled
switch. ZXJ10 digital program-controlled switching system is distributed between modules, module classification control,
centralized management of the open architecture, based on general computer platform, LAN technology as the support, client/server mode
to control the basic form of structure, in order to make the system has flexible networking ability, strong call processing capability, high
reliability, good compatibility and expansibility.


Original Research Articles

Fu Yanbo
7 Views, 76 PDF Downloads

The trend of mobile, broadband and IP is becoming more and more prominent. Mobile communication technology is now in a
critical period in the evolution of network technology. As such, LTE (Long Term Evolution) comes to light. LTE serves as a unified standard
for the new generation of mobile communications, equipped with high spectral efficiency, high peak rate, high mobility, flat network
architecture and other advantages. Huawei has played a very important role in the commercialization of LTE. As a sponsor of NGMN,
Huawei has been actively involved in the research of some key projects of NGMN, such as network self-optimization, system architecture
and Network performance evaluation and so on. This paper mainly introduces the problems encountered in the optimization of LTE
network coverage, the practical problems encountered by the LTE project team in Qingdao and the analysis and solutions to the problems.
At the same time, this paper discusses in detail on the LTE network optimization process.


Original Research Articles

Fan Lili
9 Views, 13 PDF Downloads

This article mainly describes the formation of various types of wireless LAN, as the current wireless LAN (Wireless LAN)
technology can be very convenient to wireless network equipment and mobile devices, people can access the network resources at anytime,
anywhere by communication Mobile, personalized and multimedia applications. In the continuous development of network technology,
wireless LAN is also changing our way of life, we can access to internet in amusement park, hotel, airport station and other areas. And in
school, teachers and students in the dormitory can have communication through the wireless LAN layout. Wireless LAN also has many
advantages and disadvantages, we need to understand the discovery of applications, this is the only way we can have a better life, learning,
and work.


Original Research Articles

Yang Xinghua
11 Views, 14 PDF Downloads

With the rapid development of global communications business, future personal communication wireless mobile communication
technology has aroused great concern. Way to eliminate the impact of co-channel interference (CCI), multiple access interference (MAI)
and multipath fading becomes a major factor in improving the performance of wireless mobile communication systems. The smart antenna
uses the digital signal processing technology to generate the spatial directional beam so that the antenna main beam is aligned with the
direction of arrival of the user signal. The side lobe or the zero point is aligned to the direction of the interfering signal to reach the full
efficient use of the mobile subscriber signal, thus remove or suppress the interference signal purpose. Compared with other increasingly
deep and mature interference removal technology, the application of smart antenna technology in mobile communication is even more in the
ascendant and showing great potential. One of the key technologies of the third generation mobile communication standard TD-SCDMA
system submitted by our country is the intelligent antenna technology. The paper introduces the history and development of the smart
antenna in detail, and deeply analyzes the application of the smart antenna in TD-SCDMA. The application of smart antenna has been


Original Research Articles

lv Chunhai
21 Views, 14 PDF Downloads

Communication modernization is an important symbol of human societies as we enter into the information age. An important
problem encountered in modern communication is interference. With the development of communication, the establishment of various
communication networks, making the limited frequency of resources more crowded, intertwined to the serious. How to ensure that the
communication is effective, accurate and rapid in the harsh environment conditions in front of today's communications researchers is a
difficult problem. As the mobile communication system must use wireless transmission technology in order to achieve the exchange of
information in the mobile, wireless transmission is vulnerable to a variety of other radio waves interference, a large number of interference
will greatly affect the quality of network communications and system capacity. Anti-jamming technology with strong resistance, strong
technical, difficult, practical and reliable high characteristics, in today's increasingly harsh electromagnetic environment, anti-jamming
technology is particularly compelling. It can greatly improve the effectiveness and reliability of the communication system in the
communication system. Today, anti-jamming technology has become the mainstream of radio communications technology, it is the most
closely linked with the field of communications. This paper mainly discusses the interference problem of GSM system in mobile
communication anti-jamming technology, including the interference type in GSM, the anti-interference ability of GSM itself and how to
optimize the network to achieve the purpose of anti-jamming, so as to meet the requirements of users System capacity while maintaining
good call quality.


Original Research Articles

Ahmed Elhattab 1, Nasim Uddin 2
1 Views, 1 PDF Downloads

Natural Frequencies of structures is an elegant intrinsic property that is essential for many Civil Structural applications, as Structural Health Monitoring and Simulation Modeling. The physically tangible relation between the frequency of the structures and its dynamic characteristics was the impetus for using different time/frequency based methods to quantify this fundamental property. Unfortunately, the disruption effect of noise requires incorporating advanced sensors, that provide signals with a low noise-intensity, to accurately identify the fundamental frequencies of the structure. This article solves this bottleneck via exploiting the Stochastic Resonance (SR) phenomena to extract the fundamental frequencies of a bridge using an acceleration recorded by a conventional portable sensor as the sensor implemented in small portable accelerometer. The portable accelerometer device has an M9 motion coprocessor designed mainly for tracking human activities. Human activities have an exaggerated amplitude when it is compared to the structural responses. Therefore, if an iPhone device is used to record the response of the structure (for example a bridge) the structure response will be swamped by severe surrounding noise because of its small amplitude. Therefore, in this vein, the SR phenomena has been employed to use rather than suppress the noise to magnify the feeble bridge response in the recorded acceleration and hence identify the corresponding frequency. The fidelity of the proposed approach has been verified using the data of a field experiment. The bridge frequencies are identified first using conventional vibration analysis, thereafter, the portable accelerometer has been attached to the bridge rail to record the bridge vibration under the passing traffic. The recorded data has been processed using a new Developed Underdamped Pinning Stochastic Resonance (DUPSR) technique to quantify the bridge frequency.


Original Research Articles

Anjali Verma 1, Raghavendra Pal 1, Arun Prakash 1, Rajeev Tripathi 1
1 Views, 1 PDF Downloads

Since traffic is increasing considerably day by day so information exchange for vehicular environment is very important to increase safety and to provide proper guidance of road side services available to driver during journey. Because of increased attraction towards Intelligent Transportation System (ITS) services it is required to design a system which can retrieve information very efficiently. A two-tier VANET/P2P system is basically the integration of two different type of services which are used for information exchange. Low-tier vehicular Ad-hoc networks (VANETs) can be used for achieving low lookup latency whereas high-tier infrastructure based Peer-to-Peer (P2P) can be used for increasing lookup success rate. In proposed protocol distance based reachability has been used. Reachability reduces lookup latency while maintaining moderate lookup success rate. Parameters for proposed adaptive lookup two-tier mechanism have been compared with the conventional two-tier lookup mechanism using Network Simulator (NS 2.34). 


Original Research Articles

Taha A. Elwi
11 Views, 4 PDF Downloads

The objective of this paper is to study intensively the design of a printed slotted patch based lotus shape structure mounted on a dielectric substrate backed with an electromagnetic band Gap (EBG) layer for wideband applications. The dielectric substrate is made of a Roger RT/duroid®5880 layer. An EBG layer is introduced on the back profile of the substrate to provide a high gain bandwidth product over wide frequency bands. The antenna is fed with a novel coplanar waveguide (CPW) structure of a flared geometry; therefore, the ground plane is mounted on the same substrate surface with the patch structure. A conductive trace is introduced at the substrate back from the bottom connected to the CPW through two shoring plates to remove the effects of the EBG layer on the feed structure. The EBG performance and the antenna design methodology are discussed using analytical analyses and numerical parametric studies, respectively. The numerical simulation is conducted using CST MWS Finally; the optimal antenna design is fabricated and measured for validation to be compared to the simulated results.


Original Research Articles

Lokeswara Rao Bhogadi 1, N. Bhagyalaxmi 2
0 Views, 0 PDF Downloads

In the present era of information technology, there is a need to implement authentication and authorization techniques for security of resources. There are number of ways to prove authentication and authorization. But the biometric authentication beats all other techniques. Biometric techniques prove the authenticity or authorization of a human being based on his/her physiological or behavioural traits. Biometrics is a technique by which an individual's identity can be authenticated by applying the physical or behavioural trait. Physical traits like fingerprints, palm, iris etc. are based on the physical characteristics which are generally inherent and unique. Behavioural traits like voice, signature or keystroke dynamics etc. on the other hand, are quantifiable characteristics.They also protect access of resources from unauthorized users. Multimodal biometrics refers to the use of a combination of two or more biometric modalities in a verification / identification system. Identification based on multiple biometrics represents an emerging trend. The most compelling reason to combine different modalities is to improve the recognition rate. This can be done when biometric features of different biometrics are statistically independent. A multimodal biometric identification system aims to fuse two or more physical or behavioural traits. Multimodal biometric system is used in order to improve the accuracy. Multimodal biometric identification system based on iris, palm and fingerprint trait based on fusion logic is proposed. Typically in a multimodal biometric system, each biometric trait processes its information independently. The processed information is combined using curve let transform.

Read more

Indexing and Archiving

Wireless Communication Technology (WCT) aims to be indexed by world-recognized databases, for example, PubMed, Scopus and Science Citation Index (SCI). WCT has been indexed and archived by several databases:

Editorial Board

For the list of editorial board members, click here.

Focus and Scope

Wireless Communication Technology is an international Open Access journal that publishes original research articles and review articles related to all areas of wireless communication. Wireless Communication Technology focuses on research and development in wireless communications, mobile systems, coding theory, power consumption, dynamic spectrum allocation, multimedia, social networking and computing technologies.

For Authors

  • A manuscript would not be accepted if it has been published or is currently under consideration for publication in any other journals. The author will need to notify the editorial team if the data in their submission has been presented in conferences.

  • Authorship should be limited to people who have contributed substantially to the work. Authors must indicate their specific contributions to the published work. This information should be listed in the manuscript under the section ‘Author Contribution’. Examples of contributions include: designed research, performed research, contributed new reagents or analytic tools, analyzed data, wrote the paper.

    For more information on submission’s format, please refer to the ‘Author Guidelines’ link accessible from the ‘About’ button at the top row of this page.

    The corresponding author should be clearly indicated for all manuscripts submitted. A maximum of two corresponding authors are allowed for the responsibilities associated. The corresponding author(s) is responsible for:

    • Obtaining permission from all the authors mentioned in the manuscript
    • Ensuring adherence to all editorial and submission policies and for any communications and actions that may be necessary after publication
    • Including written permission from the authors of the work concerned for any mention of any unpublished material included in the manuscript, e.g. data from manuscripts-in-press, personal communication, or work in preparation.
  • The author has to provide the authorization of no conflict with any financial body or funding agency that might influence the results or interpretation of their manuscript. All authors, members, reviewers and editors must disclose any association that poses a conflict of interest in connection with the manuscript. The corresponding author will be asked to sign a form behalf of all of the authors regarding potential conflicts of interest at the time of acceptance.

  • The editorial team does not approve of any plagiarism attempts. iThenticate will be utilized at the editor’s discretion to verify the originality of submitted manuscripts. If plagiarism is detected during the review process the manuscript may be rejected pending the severity of plagiarism. Therefore, if a manuscript uses a text copied directly from another source, this text must be written in quotation marks and the original source must be cited.

  • All articles must be written in English — preferably American English. SI units should be used. If you are not a native English speaker, you may want to utilize an external or Whioce Publishing’s optional professional language editing service before submitting the final version.

  • Whioce Publishing Pte Ltd offers its own professional editing services. By using this service, you can be sure that your English-language manuscript will be polished and ready for submission to your publication of choice at a very reasonable price. For further details about the Language Editing Services, please contact us at editorial@whioce.com. Please note that utilizing a language editing service is not a guarantee of acceptance.

  • Revised manuscripts must contain a detailed point by point response to the comments of the reviewers. The response to reviewers has to be uploaded as a separate file.

  • If you withdraw your manuscript after it has been accepted (but not yet published), you will be charged for costs incurred at USD200.

  • Authors are expected to have minimum amount of post-acquisition processing of data. In case of processing; alterations must be applied to the entire image (e.g., brightness, contrast, color balance). Any kind of alteration if being done has to be clearly stated in the figure legend and in Methods section.

    Grouping of data (e.g., cropping of images of removal of lanes from gels and bolts) must be made apparent and should be explicitly indicated in the appropriate figure legends. Data comparisons should only be made from comparative experiments, and individual data should not be utilized across multiple figures. If inappropriate image/data manipulation is identified after publication, we reserve the right to ask for the original data and, if that is not satisfactory, to issue a correction or retract the paper, as appropriate.

  • Whioce Publishing will preserve e-journals with Portico, ensuring that they will be secure and available into the future.

  • Authors contributing to Whioce Publishing Pte. Ltd. agree to publish their articles under the Creative Commons Attribution-Noncommercial 4.0 International License, allowing third parties to share their work (copy, distribute, transmit) and to adapt it, under the condition that the authors are given credit, that the work is not used for commercial purposes, and that in the event of reuse or distribution, the terms of this license are made clear.
  • The names and email addresses entered in this journal site will be used exclusively for the stated purposes of this journal and will not be made available for any other purpose or to any other party.

Article Processing Charges (APC)

Wireless Communication Technology is an Open Access Journal under Whioce Publishing. All articles published in Wireless Communication Technology are accessible electronically from the journal website without commencing any kind of payment. In order to ensure contents are freely available and maintain publishing quality, Article Process Charges (APC) is applicable to all authors who wish to submit their articles to the journal to cover the cost incurred in processing the manuscripts. Such cost will cover the peer-review, copyediting, typesetting, publishing, content depositing and archiving processes. Those charges are applicable only to authors who have their manuscript successfully accepted after peer-review.

Journal TitleAPC
Wireless Communication Technology$800

We encourage authors to publish their papers with us and don’t wish the cost of article processing fees to be a barrier especially to authors from the low and lower middle income countries/regions. A range of discounts or waivers are offered to authors who are unable to pay our publication processing fees. Authors can write in to apply for a waiver and requests will be considered on a case-by-case basis.

Authors based in these countries/regions listed below may apply to receive up to a 50%-100% waiver of the standard article processing fee; Waiver subjected to approval.

  • Afghanistan
  • Armenia
  • Bangladesh
  • Benin
  • Bhutan
  • Bolivia
  • Burkina Faso
  • Burundi
  • Cabo Verde
  • Cambodia
  • Cameroon
  • Central African Republic
  • Chad
  • Comoros
  • Congo, Dem. Rep
  • Congo, Rep.
  • Côte d'Ivoire
  • Djibouti
  • Egypt, Arab Rep.
  • El Salvador
  • Eritrea
  • Ethiopia
  • Gambia, The
  • Ghana
  • Guatemala
  • Guinea
  • Guinea-Bissau
  • Haiti
  • Honduras
  • India
  • Indonesia
  • Kenya
  • Kiribati
  • Korea, Dem. People's Rep.
  • Kosovo
  • Kyrgyz Republic
  • Lao PDR
  • Lesotho
  • Liberia
  • Madagascar
  • Malawi
  • Mali
  • Mauritania
  • Micronesia, Fed. Sts.
  • Moldova
  • Mongolia
  • Morocco
  • Mozambique
  • Myanmar
  • Nepal
  • Nicaragua
  • Niger
  • Nigeria
  • Pakistan
  • Papua New Guinea
  • Philippines
  • Rwanda
  • Samoa
  • São Tomé and Principe
  • Senegal
  • Sierra Leone
  • Solomon Islands
  • Somalia
  • South Sudan
  • Sri Lanka
  • Sudan
  • Swaziland
  • Syrian Arab Republic
  • Tajikistan
  • Tanzania
  • Timor-Leste
  • Togo
  • Tonga
  • Tunisia
  • Uganda
  • Ukraine
  • Uzbekistan
  • Vanuatu
  • Vietnam
  • West Bank and Gaza
  • Yemen, Rep.
  • Zambia
  • Zimbabwe

If you are residing in one of the above mentioned countries and need to apply for a waiver, please email our editorial department (editorial@whioce.com) with the following information:

  • Your name and institution with full address details
  • Title of journal you wish to submit a manuscript to
  • Reason for applying for a waiver
  • Title of your paper
  • Country of residence of all co-author

APC Payment

Payments for APC of this journal can be made through our online PayPal payment gateway. Enter the article no. into the below textbox and select "Pay Now" to proceed with payment.

Article No.

*Article No. is mandatory for payment and it can be found on the acceptance letter issued by the Editorial Office. Payment without indicating Article No. will result in processing problem and delay in article processing. Please note that payments will be processed in USD. You can make payment through Masters, Visa or UnionPay card.

Frequently Asked Questions

  • Answer: To establish whether your paper is suitable for this journal, please read Focus and Scope under Editorial Policies.
  • Answer: Registration and login are required to submit manuscript online and to check the status of current submission.
  • Answer: The submission file can be submitted in OpenOffice, Microsoft Word, RTF, or WordPerfect document file format.
  • Answer: The length of the manuscript cannot be more than 8000 words.
  • Answer: The cover letter is necessary for each submission. The cover letter should be uploaded as a separate file in Step 4 during the submission. The contents of the cover letter should include brief explanation of what was previously known, the conceptual advancement with the findings and its significance to broad readership. The cover letter will only be visible to the editor. Reviewers will not have access to the cover letter.
  • Answer: You can suggest 2 reviewers for your submission. However, the decision of whether to invite them lies with the Editor.
  • Answer: This journal provides immediate open access to its content on the principle that making research freely available to the public supports a greater global exchange of knowledge. Refer to the Publication Fees tab for more details.





Whioce Publishing Pte Ltd  and the Editor-in-chief invite all authors  to submit their  manuscripts to  our  newly launched  journal, Wireless Communication Technology, for peer review.

Posted: 2017-06-08
More Announcements...